( l blew my headgaskette ) anyways fresh rebuilt cylinderhead that one of the exhaust valves got just slightly bent it is seating but not perfect.
Brandnew cap and rotor and wires that l just messed up the bremi 13270A1 boot , does somebody have a new boot or just the cap to coil wire. I got this bremi set for fn 20 bucks. (Its 95 degrees and my ac is down due 2 a leak)
The coil is brandnew 2 days ago l thaught that would cure the random bucking and random stalling?
Also my speedo quit working at 200k in the desert land and my fuel gauge is shorting?
It seems to me it started bucking while headgaskette was messed and l had to drive it messed up for 3 weeks...........l haven't done a compression test yet but the pistons looked good so did the bores
Benefit of having a talldeck is there stronger and made for stroking.
Weres every 1 get there not slow you have to turn your distributer till it idles around 1000 then turn your idle circuit down
11 1200 gets hard on the motor