2006 Passat CC.
After some driving, car stops moving when starting and shifting from P into R or D.
Code: 17130 - Pressure Control Solenoid 1 - P0746 - 012 - Implausible Signal or Stuck Off
Was told likely N215 and N216.
Bought tranny and removed the 2 solenoids.
Before installing the 'new' ones, would like to dry test all 4.
What should I measure?
Resistance across pins (and compare all 4)?
Put 12V across and do some 'clicking'? Or 5V?
After installation, can I run an output test with VAGcom (and diagnostics) without filling with oil?