- Thor Skid Plate Kit For Audi A4 & S4 1996-2008 $275 obo
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    Results 1 to 3 of 3
    1. 12-15-2019 08:24 PM #1
      *edit link to CL post:

      Hey all,

      I have for sale the Evolution Import Thor Skid Plate for a B5 A4/S4 (& other chassis as well according to their site).
      Brand new/never used as I sold my B5 A4 3yrs ago, so it's been sitting in my basement taking up space.

      See description below taken from their website:

      The Thor A4 Skid Plate Kit Includes:

      SKU A1007- 1 Thor Aluminum Skid Plate.
      SKU A2006- 1 Thor Audi A4 Hardware Kit, containing:

      2 Aluminum Thor Side Wings.
      1 Thor Rivet Nut Installation Tool.
      1 Thor Audi A4 Bolt Kit


      1996-2001 Audi A4, Sedan, Avant & Wagon (B5 Platform)
      1998-2002 Audi S4, Sedan, Avant & Wagon (B5 Platform)
      2002-2008 Audi A4, S4, Sedan, Avant & Wagon (B6 & B7 Platform)


      Audi's oil pans are made of a paper-thin cast aluminum that is easily cracked by many objects such as road debris, manhole covers and speed bumps. While your car may be at stock height, there is only approximately 4 inches of ground clearance with your oil pan. If you are lowered from stock height, there is very little room for error when negotiating an object in your path. Here is some information on this Evolution Aluminum Skid Plate for those of you that haven't seen it before.
      The plate is 5052 grade aluminum and is 4.8mm (.191 inches) thick.
      Weighs 16.7 pounds
      Protects your cars oil pan, a/c pump, radiator & transmission (does not cover the transmission fully).
      Bolts to you vehicle with 3 structural mounts and up to two additional plastic mounts.
      45 to 60 minute install.
      Once the plate is installed it is only 4-5 bolts that need to be removed for your oil change(1-2minutes).
      Fits all engines and transmissions. A4, S4 V8 engine owners must read the info at the bottom of the page.
      Fits perfect with the Hotchkis Front Sway Bar.
      Never rusts.
      Maximum amount of ground clearance possible provided.
      Air duct to allow air flow onto the transmission.
      Specially designed so you won't have to worry about air forcing your plastic tire well lining back and into your tires.
      Designed, tested and proven by EVOLUTION IMPORT INC.
      Shipped to your door step in a box as a complete kit. No other attachments need to be purchased.
      Draft/Design by: EVOLUTION IMPORT INC.
      CNC Machine Manufactured.

      A detailed easy to follow, step by step guide is only located on our website and not included in the kit. The Install Guide for your kit is: Thor Audi A4 Install Guide

      Note: This skid plate does fit the S4 with V8 engine with manual transmission only by adding the spacer kit to the front. This kit does not fit the V8 with auto transmission. All Audi A4/S4 with the V8 engine will require spacers at the front and back of the plate. Two at the front and two at the back. Here is a link to the pack of aluminum spacers: Spacer Kit

      Note: There could be surface scratches on the skid plate during manufacturing, handling or shipping which won't compromise the usefulness of the product. Please note that we won't warranty a skid plate for surface scratches as the skid plate is going to get scratched immediately after installation.

      Oil Changes:

      With the Thor skid plate we do not offer an oil drain hole option. If we were to put one on the skid plate, the hole would be located right on the ramped section of the skid plate. This would be bad as the hole could easily catch an object on the road causing a major hazard for you and other vehicles on the road. So the skid plate will need to be removed in order to gain access to the oil filter and drain plug. However if you want to put your own access holes into the skid plate, it is at your own risk. We have added two 1/2 inch sight holes so you can locate your oil plug for proper alignment while you cut your own oil drain hole. Removal of the skid plate for oil changes is very quick and easy, taking 1-2 minutes. Only the bottom four or five bolts need to be removed and the skid plate drops right down and off of your Audi. The aluminum side wings don't need to be unbolted from the skid plate.

      *** PICS ***


      *** PRICE *** $250 obo ***, local pick up in North Jersey, no shipping ***
      *** text 90eight 72zero 79twotwo for fastest response ***
      Last edited by LboogieG12; 01-17-2020 at 11:38 AM.

    2. Remove Advertisements


    3. 01-04-2020 04:18 PM #2
      updated price

    4. 01-17-2020 11:38 AM #3
      ** sold ***

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts