Can anyone link to a kit or give part number that fits AEB with 02A gearbox?
did a lot of research and found only to trans engine.
thanks in advance!
Same as any other 4cyl with 02a. Common would be using the g60 setup.
1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning
thanks, but when i talk to this site its not the same. quick check is my height from crank mounting face to fingers is around 85mm and the vr6/g60 is 60... i was thinking of buying this but now i dont know what is correct to buy.
When i read others at this forum some is saying to use original 20v flywheel with VR6 Clutch Disc and G60 Pressure Plate. is that possible and is this correct then?
https://www.autodoc.co.uk/sachs/1219868?search=SACHS Flywheel (2294 002 144)
VR6 Clutch Disc:
G60 Pressure Plate:
This is what you want. The reason for the VR6 Clutch kit (disk and pressure plate) is that the Pressure Plate has more clamping force than the G60. That other link you posted is a Dual Mass flywheel from a later car.
Above 228mm kit is for any 02a/o2j on any 4cyl Mk1,Mk2,Mk3,Mk4