VW Vortex - Volkswagen Forum banner

:: GruvenParts.com: Get your Bumper Brackets and Strut Caps Right Here! ::

2K views 3 replies 2 participants last post by  GruvenParts.com 
#1 ·

Billet Front and Rear Aluminum Bumper Brackets!
We’re happy to stock these billet aluminum bumper brackets to replace OEM P/N 1H0-807-193 (1H0807193). These fit both the front and the rear bumpers and are sold in pairs with 2 pairs being required for a complete vehicle (front and rear).
These billet brackets replace the factory plastic brackets that warp and bend over time causing the bumper to sag. Reuse your factory 10mm nut that held the original bracket in place. Allows for vertical adjustment of bumper bracket if needed.
This product carries a LIFETIME WARRANTY !
Fits Euro and North American bumpers.
Product Fitment/Applications (Please verify your OEM P/N before ordering) :
- Cabrio/Cabriolet 2.0L (97-02)
- EuroVan (92-96)
- Passat incl Syncro (90-94)
- Quantum 2.2L KE-Jetronic 5 Cylinder (86-88)
- Quantum syncro 2.2L KE-Jetronic 5 Cylinder (85-88)

** Will fit mk2 and other models but will require drilling to attach.
 
See less See more
1
#4 ·
## GruvenParts.com: The Best Strut Caps in the Business! ##


Billet MK2 / MK3 Strut Caps!

GruvenParts.com MK2/MK3 VW Billet Strut Caps - NOW IN STOCK !!!

Dress up your engine bay and take the shows by storm with our Billet Strut Caps made from 6061-T651 aircraft aluminum for VW MK2 and MK3 (MK4 coming soon). These billet caps are sold in sets of 2 and have a machined finish. We can also chrome plate, anodize, or powder coat in any color (please inquire via email to paul@gruvenparts.com). We can also handle ""special"" orders if you want a custom design (please inquire via email).


Engine Install Pic - Billet MK2 / MK3 Strut Caps!


Close Up Install Pic - Billet MK2 / MK3 Strut Caps!


These billet strut caps are intended to fit over the following OEM parts :

1H0-412-319B (1H0412319B) Stop
357-412-319B (357412329) Stop
1H0-412-356A (1H0412356A) Stop
357-412-411A (357412411A) Stop

and replace the cap found on some MK3 4 cylinder models :

1H0-412-329 (1H)412329) Cap

Our parts are specially machined to accept the strut stop/cap on all MK2 and MK3 Golf, Jetta, Passat, Corrado, Cabrio, Cabriolet from 1985-1999.

We'll also begin work on the MK4 versions as well, stay tuned!

Sold in sets of 2 - all stainless set screws included !
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top