VW Vortex - Volkswagen Forum banner

p0016

2K views 1 reply 2 participants last post by  RDoDo 
#1 ·
Hello I have a 2011 Tiguan and i am getting the p0016 code. I have replaced the guides timing belt intake camshaft the upper camshaft bridge the valve that goes inside the camshaft also the magnet. I have changed everthing that has to do with the timing belt. everything has been check and measured and the timing is good.

If i keep the car at 1500RPM car is fine and starts right up. Once i let the car idle on the second start it takes a little longer and the code comes back on . Can anyone please help:facepalm:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top