Fourtitude.com - :: GruvenParts.com Billet G60 Engine Components and Much More !
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    Fourtitude.com


    Page 1 of 3 123 LastLast
    Results 1 to 25 of 71
    1. Forum Sponsor GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,529
      Cars
      Too many to list !
      09-28-2016 04:31 PM #1
      "
      G60 Lightweight Crank Pulley

      GruvenParts.com has designed a CNC billet aluminum lightweight Crank pulley for the Corrado G60 8V Engine. This pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The part is completed entirely on the CNC mill, and therefore has a nearly chrome surface finish. Our G60 crank pulley reduces the rotating mass by over 5 lbs.

      Please email if interested in the billet tensioner and alternator pulleys. We did make a run of them and could make more if we got 10 interested people.

      These pulleys replace the following OEM part numbers :

      Crank : 037-105-255 (037105255)
      Tens : 074-145-278E (074145278E)
      Alt : 037-903-119 (037903119)




      "

    2. Remove Advertisements

      Advertisements
       

    3. Member northendroid's Avatar
      Join Date
      Sep 16th, 2014
      Location
      Cornwall, Ontario, Canada
      Posts
      1,934
      Cars
      1991 Corrado G60 in progress, 1998 GTI VR6, 2012 Audi TTRS Black Panther
      09-29-2016 08:41 PM #2
      I'd be interested what would be the cost for all three?
      Restoring: 1991 Corrado G60
      Corrado Buddy MK3 GTI VR6
      2012 Audi TTRS
      ACNA Eastern Canada Communication Director

    4. Forum Sponsor GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,529
      Cars
      Too many to list !
      10-15-2016 10:08 AM #3
      "


      Click Here for Peloquin Limited Slip Diffs Sold By GruvenParts


      *** GRUVEN BEATS ALL COMPETITOR PRICING - Email [email protected] for Current Pricing Info ***
      We almost always have group buys and specials going on, to get in on the best pricing for these diffs, just email us!


      We've all used his legendary limited slip differentials for years.

      GruvenParts.com is proud to team up with Gary Peloquin to become the newest distributor of these great front and rear limited slip diffs for a wide range of vehicles. If you dont already have 1 installed, trust us, YOU NEED 1! These limited slip diffs improve acceleration, braking, and cornering. Win-Win-Win.

      GruvenParts.com has the best pricing and customer service, please contact us for more info on these great limited slip diffs!

      We offer the following Peloquin LSD's and some others. Please provide your transmission code and shipping address when inquiring via email.

      02M :
      02M-498-005B (02M498005B) MK4 R32 / Audi TT MK1 Front Diff P/N
      MK4R32 / Audi TT MK1 Rear Diff
      02M-498-005A (02M498005A)

      020
      020-498-005A (020498005A)
      020 – 80% kit - This kit increases the factory 20% anti torque steer effect to 80%.

      02J
      02J-498-005A (02J498005A)
      02J-498-005B (02J498005B)

      02A
      02A-498-005A (02A498005A)

      02K
      02K-498-005A (02K498005A)

      02C
      02C-498-005A (02C498005A)
      02C-498-005B (02C498005B)
      02C-498-005 Rear (02C498005)

      02Q
      02Q-498-006A (02Q498006A)
      02Q-498-005B (02Q498005B)

      02E DSG 2WD and 4WD"

    5. Remove Advertisements

      Advertisements
       

    6. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      10-21-2016 11:47 AM #4
      " Corrado Billet Radiator Necks – Special Sale Price !!


      Corrado Billet Upper ""Rad Neck""

      This is the ORIGINAL billet Corrado radiator neck, thousands have been sold! This part is professionally TIG welded by licensed A&P’s who spend most of their time working on commercial jet aircraft. Simply put : NO ONE can do it better!!

      www.GruvenParts.com has designed a TIG welded billet version of the Corrado upper radiator neck to replace the weak plastic factory radiator neck prone to cracking and dropping chunks which clog your radiator. We closed the book on this part, and it will never need to be replaced again. ""Wife-beater"" t-shirt not included. There is NO reason to buy the plastic version.

      This part replaces OEM P/N 535-121-647 (535121647) found on all Corrado G60 and VR6. Comes with all new fasteners and new aerospace grade O-ring – EVERYTHING needed to replace the factory plastic neck.
      "

    7. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      10-24-2016 01:39 AM #5
      "
      Billet MK2 / MK3 Strut Caps!

      GruvenParts.com MK2/MK3 VW Billet Strut Caps - NOW IN STOCK !!!

      Dress up your engine bay and take the shows by storm with our Billet Strut Caps made from 6061-T651 aircraft aluminum for VW MK2 and MK3 (MK4 coming soon). These billet caps are sold in sets of 2 and have a machined finish. We can also chrome plate, anodize, or powder coat in any color (please inquire via email to [email protected]). We can also handle ""special"" orders if you want a custom design (please inquire via email).


      Engine Install Pic - Billet MK2 / MK3 Strut Caps!


      Close Up Install Pic - Billet MK2 / MK3 Strut Caps!


      These billet strut caps are intended to fit over the following OEM parts :

      1H0-412-319B (1H0412319B) Stop
      357-412-319B (357412329) Stop
      1H0-412-356A (1H0412356A) Stop
      357-412-411A (357412411A) Stop

      and replace the cap found on some MK3 4 cylinder models :

      1H0-412-329 (1H)412329) Cap

      Our parts are specially machined to accept the strut stop/cap on all MK2 and MK3 Golf, Jetta, Passat, Corrado, Cabrio, Cabriolet from 1985-1999.

      We'll also begin work on the MK4 versions as well, stay tuned!

      Sold in sets of 2 - all stainless set screws included !
      "

    8. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      11-06-2016 11:27 PM #6
      "
      G60 Lightweight Crank Pulley

      GruvenParts.com has designed a CNC billet aluminum lightweight Crank pulley for the Corrado G60 8V Engine. This pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The part is completed entirely on the CNC mill, and therefore has a nearly chrome surface finish. Our G60 crank pulley reduces the rotating mass by over 5 lbs.

      Please email if interested in the billet tensioner and alternator pulleys. We did make a run of them and could make more if we got 10 interested people.

      These pulleys replace the following OEM part numbers :

      Crank : 037-105-255 (037105255)
      Tens : 074-145-278E (074145278E)
      Alt : 037-903-119 (037903119)




      "

    9. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      11-14-2016 12:48 AM #7
      " Corrado Billet Radiator Necks – Special Sale Price !!


      Corrado Billet Upper ""Rad Neck""

      This is the ORIGINAL billet Corrado radiator neck, thousands have been sold! This part is professionally TIG welded by licensed A&P’s who spend most of their time working on commercial jet aircraft. Simply put : NO ONE can do it better!!

      www.GruvenParts.com has designed a TIG welded billet version of the Corrado upper radiator neck to replace the weak plastic factory radiator neck prone to cracking and dropping chunks which clog your radiator. We closed the book on this part, and it will never need to be replaced again. ""Wife-beater"" t-shirt not included. There is NO reason to buy the plastic version.

      This part replaces OEM P/N 535-121-647 (535121647) found on all Corrado G60 and VR6. Comes with all new fasteners and new aerospace grade O-ring – EVERYTHING needed to replace the factory plastic neck.
      "

    10. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      11-22-2016 12:25 AM #8
      "
      Billet MK2 / MK3 Strut Caps!

      GruvenParts.com MK2/MK3 VW Billet Strut Caps - NOW IN STOCK !!!

      Dress up your engine bay and take the shows by storm with our Billet Strut Caps made from 6061-T651 aircraft aluminum for VW MK2 and MK3 (MK4 coming soon). These billet caps are sold in sets of 2 and have a machined finish. We can also chrome plate, anodize, or powder coat in any color (please inquire via email to [email protected]). We can also handle ""special"" orders if you want a custom design (please inquire via email).


      Engine Install Pic - Billet MK2 / MK3 Strut Caps!


      Close Up Install Pic - Billet MK2 / MK3 Strut Caps!


      These billet strut caps are intended to fit over the following OEM parts :

      1H0-412-319B (1H0412319B) Stop
      357-412-319B (357412329) Stop
      1H0-412-356A (1H0412356A) Stop
      357-412-411A (357412411A) Stop

      and replace the cap found on some MK3 4 cylinder models :

      1H0-412-329 (1H)412329) Cap

      Our parts are specially machined to accept the strut stop/cap on all MK2 and MK3 Golf, Jetta, Passat, Corrado, Cabrio, Cabriolet from 1985-1999.

      We'll also begin work on the MK4 versions as well, stay tuned!

      Sold in sets of 2 - all stainless set screws included !
      "

    11. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      11-28-2016 11:52 PM #9
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    12. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      12-05-2016 12:27 AM #10
      " Corrado Billet Radiator Necks – Special Sale Price !!


      Corrado Billet Upper ""Rad Neck""

      This is the ORIGINAL billet Corrado radiator neck, thousands have been sold! This part is professionally TIG welded by licensed A&P’s who spend most of their time working on commercial jet aircraft. Simply put : NO ONE can do it better!!

      www.GruvenParts.com has designed a TIG welded billet version of the Corrado upper radiator neck to replace the weak plastic factory radiator neck prone to cracking and dropping chunks which clog your radiator. We closed the book on this part, and it will never need to be replaced again. ""Wife-beater"" t-shirt not included. There is NO reason to buy the plastic version.

      This part replaces OEM P/N 535-121-647 (535121647) found on all Corrado G60 and VR6. Comes with all new fasteners and new aerospace grade O-ring – EVERYTHING needed to replace the factory plastic neck.
      "

    13. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      12-07-2016 02:46 PM #11
      "
      G60 Lightweight Crank Pulley

      GruvenParts.com has designed a CNC billet aluminum lightweight Crank pulley for the Corrado G60 8V Engine. This pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The part is completed entirely on the CNC mill, and therefore has a nearly chrome surface finish. Our G60 crank pulley reduces the rotating mass by over 5 lbs.

      Please email if interested in the billet tensioner and alternator pulleys. We did make a run of them and could make more if we got 10 interested people.

      These pulleys replace the following OEM part numbers :

      Crank : 037-105-255 (037105255)
      Tens : 074-145-278E (074145278E)
      Alt : 037-903-119 (037903119)




      "

    14. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      12-14-2016 01:21 AM #12
      "
      Corrado Dash Vent Fix Kit!

      GruvenParts.com is happy to release this dash vent fix kit for all 1989-1992 Corrado G60 and SLC.

      These plastic replacement linkages replace the OEM brittle rubber molded linkages that position the slats on the vents. Once the OEM linkages fail, the slats on your vents flop around and no longer direct vent airflow correctly.

      This is a common issue that Tek Euro saw fit to fix and we are happy to distribute for them.
      This product fits all 1989-1992 Corrado G60 and Corrado SLC with the ""old style"" vents (all Corrado with non-rotary style HVAC controls).
      "

    15. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      12-15-2016 11:40 PM #13
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    16. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      12-23-2016 10:24 AM #14
      "
      G60 Lightweight Crank Pulley

      GruvenParts.com has designed a CNC billet aluminum lightweight Crank pulley for the Corrado G60 8V Engine. This pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The part is completed entirely on the CNC mill, and therefore has a nearly chrome surface finish. Our G60 crank pulley reduces the rotating mass by over 5 lbs.

      Please email if interested in the billet tensioner and alternator pulleys. We did make a run of them and could make more if we got 10 interested people.

      These pulleys replace the following OEM part numbers :

      Crank : 037-105-255 (037105255)
      Tens : 074-145-278E (074145278E)
      Alt : 037-903-119 (037903119)




      "

    17. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      01-03-2017 01:02 AM #15
      " Corrado Billet Radiator Necks – Special Sale Price !!


      Corrado Billet Upper ""Rad Neck""

      This is the ORIGINAL billet Corrado radiator neck, thousands have been sold! This part is professionally TIG welded by licensed A&P’s who spend most of their time working on commercial jet aircraft. Simply put : NO ONE can do it better!!

      www.GruvenParts.com has designed a TIG welded billet version of the Corrado upper radiator neck to replace the weak plastic factory radiator neck prone to cracking and dropping chunks which clog your radiator. We closed the book on this part, and it will never need to be replaced again. ""Wife-beater"" t-shirt not included. There is NO reason to buy the plastic version.

      This part replaces OEM P/N 535-121-647 (535121647) found on all Corrado G60 and VR6. Comes with all new fasteners and new aerospace grade O-ring – EVERYTHING needed to replace the factory plastic neck.
      "

    18. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      01-06-2017 12:48 AM #16
      "
      Billet MK2 / MK3 Strut Caps!

      GruvenParts.com MK2/MK3 VW Billet Strut Caps - NOW IN STOCK !!!

      Dress up your engine bay and take the shows by storm with our Billet Strut Caps made from 6061-T651 aircraft aluminum for VW MK2 and MK3 (MK4 coming soon). These billet caps are sold in sets of 2 and have a machined finish. We can also chrome plate, anodize, or powder coat in any color (please inquire via email to [email protected]). We can also handle ""special"" orders if you want a custom design (please inquire via email).


      Engine Install Pic - Billet MK2 / MK3 Strut Caps!


      Close Up Install Pic - Billet MK2 / MK3 Strut Caps!


      These billet strut caps are intended to fit over the following OEM parts :

      1H0-412-319B (1H0412319B) Stop
      357-412-319B (357412329) Stop
      1H0-412-356A (1H0412356A) Stop
      357-412-411A (357412411A) Stop

      and replace the cap found on some MK3 4 cylinder models :

      1H0-412-329 (1H)412329) Cap

      Our parts are specially machined to accept the strut stop/cap on all MK2 and MK3 Golf, Jetta, Passat, Corrado, Cabrio, Cabriolet from 1985-1999.

      We'll also begin work on the MK4 versions as well, stay tuned!

      Sold in sets of 2 - all stainless set screws included !
      "

    19. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      01-09-2017 10:12 PM #17
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    20. Member chrism1's Avatar
      Join Date
      Sep 21st, 2014
      Location
      jersey
      Posts
      1,030
      Cars
      90 Corrado G60, 2018 Atlas SE Tech/Tow 4motion. 2016 Tiguan S 4motion,2002 TT Roadster
      01-12-2017 07:56 AM #18
      are the g60 pulleys actually available?
      "who owns the Corrado?!?"

      www.instagram.com/chrismarko1/

    21. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      01-16-2017 11:23 PM #19
      "
      G60 Lightweight Crank Pulley

      GruvenParts.com has designed a CNC billet aluminum lightweight Crank pulley for the Corrado G60 8V Engine. This pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The part is completed entirely on the CNC mill, and therefore has a nearly chrome surface finish. Our G60 crank pulley reduces the rotating mass by over 5 lbs.

      Please email if interested in the billet tensioner and alternator pulleys. We did make a run of them and could make more if we got 10 interested people.

      These pulleys replace the following OEM part numbers :

      Crank : 037-105-255 (037105255)
      Tens : 074-145-278E (074145278E)
      Alt : 037-903-119 (037903119)




      "

    22. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      01-20-2017 12:07 AM #20
      " Corrado Billet Radiator Necks – Special Sale Price !!


      Corrado Billet Upper ""Rad Neck""

      This is the ORIGINAL billet Corrado radiator neck, thousands have been sold! This part is professionally TIG welded by licensed A&P’s who spend most of their time working on commercial jet aircraft. Simply put : NO ONE can do it better!!

      www.GruvenParts.com has designed a TIG welded billet version of the Corrado upper radiator neck to replace the weak plastic factory radiator neck prone to cracking and dropping chunks which clog your radiator. We closed the book on this part, and it will never need to be replaced again. ""Wife-beater"" t-shirt not included. There is NO reason to buy the plastic version.

      This part replaces OEM P/N 535-121-647 (535121647) found on all Corrado G60 and VR6. Comes with all new fasteners and new aerospace grade O-ring – EVERYTHING needed to replace the factory plastic neck.
      "

    23. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      01-23-2017 12:12 AM #21
      "
      Billet MK2 / MK3 Strut Caps!

      GruvenParts.com MK2/MK3 VW Billet Strut Caps - NOW IN STOCK !!!

      Dress up your engine bay and take the shows by storm with our Billet Strut Caps made from 6061-T651 aircraft aluminum for VW MK2 and MK3 (MK4 coming soon). These billet caps are sold in sets of 2 and have a machined finish. We can also chrome plate, anodize, or powder coat in any color (please inquire via email to [email protected]). We can also handle ""special"" orders if you want a custom design (please inquire via email).


      Engine Install Pic - Billet MK2 / MK3 Strut Caps!


      Close Up Install Pic - Billet MK2 / MK3 Strut Caps!


      These billet strut caps are intended to fit over the following OEM parts :

      1H0-412-319B (1H0412319B) Stop
      357-412-319B (357412329) Stop
      1H0-412-356A (1H0412356A) Stop
      357-412-411A (357412411A) Stop

      and replace the cap found on some MK3 4 cylinder models :

      1H0-412-329 (1H)412329) Cap

      Our parts are specially machined to accept the strut stop/cap on all MK2 and MK3 Golf, Jetta, Passat, Corrado, Cabrio, Cabriolet from 1985-1999.

      We'll also begin work on the MK4 versions as well, stay tuned!

      Sold in sets of 2 - all stainless set screws included !
      "

    24. Member zcxerxes's Avatar
      Join Date
      Nov 13th, 2005
      Location
      44035
      Posts
      875
      Cars
      64 notchback, 90 g60 corrado, 83 gti, 84 gti
      01-25-2017 05:19 PM #22
      Quote Originally Posted by GruvenParts.com_Preston View Post
      "
      G60 Lightweight Crank Pulley

      GruvenParts.com has designed a CNC billet aluminum lightweight Crank pulley for the Corrado G60 8V Engine. This pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The part is completed entirely on the CNC mill, and therefore has a nearly chrome surface finish. Our G60 crank pulley reduces the rotating mass by over 5 lbs.

      Please email if interested in the billet tensioner and alternator pulleys. We did make a run of them and could make more if we got 10 interested people.

      These pulleys replace the following OEM part numbers :

      Crank : 037-105-255 (037105255)
      Tens : 074-145-278E (074145278E)
      Alt : 037-903-119 (037903119)




      "
      Had one of your tensioner pulleys fail. Not the bearing or actual pulley but the hub you made for the bearing wobbled out.

      Sent from my SM-G900V using Tapatalk
      sometimes you have to do $hit

    25. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      01-26-2017 11:43 PM #23
      " Corrado Billet Radiator Necks – Special Sale Price !!


      Corrado Billet Upper ""Rad Neck""

      This is the ORIGINAL billet Corrado radiator neck, thousands have been sold! This part is professionally TIG welded by licensed A&P’s who spend most of their time working on commercial jet aircraft. Simply put : NO ONE can do it better!!

      www.GruvenParts.com has designed a TIG welded billet version of the Corrado upper radiator neck to replace the weak plastic factory radiator neck prone to cracking and dropping chunks which clog your radiator. We closed the book on this part, and it will never need to be replaced again. ""Wife-beater"" t-shirt not included. There is NO reason to buy the plastic version.

      This part replaces OEM P/N 535-121-647 (535121647) found on all Corrado G60 and VR6. Comes with all new fasteners and new aerospace grade O-ring – EVERYTHING needed to replace the factory plastic neck.
      "

    26. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      01-30-2017 11:54 PM #24
      "
      G60 Lightweight Crank Pulley

      GruvenParts.com has designed a CNC billet aluminum lightweight Crank pulley for the Corrado G60 8V Engine. This pulley is precision machined to a run out of less than .001 on one of our HAAS CNC mill-lathes. The part is completed entirely on the CNC mill, and therefore has a nearly chrome surface finish. Our G60 crank pulley reduces the rotating mass by over 5 lbs.

      Please email if interested in the billet tensioner and alternator pulleys. We did make a run of them and could make more if we got 10 interested people.

      These pulleys replace the following OEM part numbers :

      Crank : 037-105-255 (037105255)
      Tens : 074-145-278E (074145278E)
      Alt : 037-903-119 (037903119)




      "

    27. Former Advertiser
      Join Date
      Aug 29th, 2016
      Posts
      4,781
      02-13-2017 11:52 PM #25
      "
      Corrado Dash Vent Fix Kit!

      GruvenParts.com is happy to release this dash vent fix kit for all 1989-1992 Corrado G60 and SLC.

      These plastic replacement linkages replace the OEM brittle rubber molded linkages that position the slats on the vents. Once the OEM linkages fail, the slats on your vents flop around and no longer direct vent airflow correctly.

      This is a common issue that Tek Euro saw fit to fix and we are happy to distribute for them.
      This product fits all 1989-1992 Corrado G60 and Corrado SLC with the ""old style"" vents (all Corrado with non-rotary style HVAC controls).
      "

    Page 1 of 3 123 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •