Fourtitude.com - The Last Project.
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    Fourtitude.com


    Page 10 of 10 FirstFirst ... 678910
    Results 226 to 248 of 248
    1. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      07-19-2018 08:00 PM #226
      Deja vu. Almost back together. This time it bent the inner clutch disc a bit and I had to hammer tune it.

      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    2. Remove Advertisements

      Advertisements
       

    3. 07-19-2018 10:19 PM #227
      does anyone offer a 10 bolt friction disk? i used one on a 1.8t with luck.


    4. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      07-19-2018 11:54 PM #228
      Haven’t seen one, but at that point I would tack weld the bolts to the friction disc.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    5. Member turboit's Avatar
      Join Date
      Oct 4th, 2001
      Location
      Delaware
      Posts
      4,230
      Cars
      '07 Audi S4 Avant, '93 Corrado SLC
      07-20-2018 08:34 PM #229
      Quote Originally Posted by need_a_VR6 View Post
      Deja vu. Almost back together. This time it bent the inner clutch disc a bit and I had to hammer tune it.

      That's crazy man!

      Sent from my Pixel XL using Tapatalk

    6. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      07-20-2018 10:22 PM #230


      Ready for the weekend.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    7. Member turboit's Avatar
      Join Date
      Oct 4th, 2001
      Location
      Delaware
      Posts
      4,230
      Cars
      '07 Audi S4 Avant, '93 Corrado SLC
      07-21-2018 12:02 PM #231
      Quote Originally Posted by need_a_VR6 View Post


      Ready for the weekend.
      You need KP Tuned windshield banner on that thing

      Sent from my Pixel XL using Tapatalk

    8. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      07-21-2018 09:21 PM #232
      Needs some body work from Bill then wrapped I think.



      If the track prepped early we could have gotten some runs in.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    9. Member turboit's Avatar
      Join Date
      Oct 4th, 2001
      Location
      Delaware
      Posts
      4,230
      Cars
      '07 Audi S4 Avant, '93 Corrado SLC
      07-21-2018 09:27 PM #233
      True! Hope you can get some clean runs in tomorrow! Good luck!

      Sent from my Pixel XL using Tapatalk

    10. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      07-22-2018 11:47 PM #234
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    11. Member G60ING's Avatar
      Join Date
      Jun 27th, 2000
      Location
      Alexandria, VA
      Posts
      15,413
      Cars
      2010 3.6 4-Motion CC, 1990 G60/TDI/R36 Corrado
      07-23-2018 05:27 PM #235
      Nice job

    12. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      07-24-2018 02:23 PM #236

















      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    13. 08-02-2018 05:43 PM #237
      Racing Improves the breed..
      "I have fought the good fight, I have finished the race, I have kept the faith"- 2 Timothy 4:7
      CrossroadsLI
      MY ALL MOTOR BUILD THREAD

    14. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      08-03-2018 11:19 AM #238
      Thanks for putting that up, I don't know how to work anything anymore now that everything is on fb and Instagram. For more WF Footage ERacer Productions has all the all motor, limited street, 11.50 and outlaw qualifying and eliminations up now. You can see me miss 3rd pretty bad on my Rd1 solo pass.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    15. Member G60ING's Avatar
      Join Date
      Jun 27th, 2000
      Location
      Alexandria, VA
      Posts
      15,413
      Cars
      2010 3.6 4-Motion CC, 1990 G60/TDI/R36 Corrado
      01-15-2019 08:57 AM #239
      Paul, are you using a 02A? I’ve got a friend who is thinking his 02A 3.6 swap that is having issues shifting gears because 300whp is too much for the transmission and wants to swap in a 02M. What are your thoughts?

    16. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      01-16-2019 09:03 AM #240
      Yeah still on an 02a with diff, 4.24 and modded syncros. I run Torco RTF exclusively. Cm twin disc clutch and hydraulic throwout. The 1-2 is still a little slow but thats above 8k lifting to shift. 2-3 and 3-4 I can flat shift it without a problem.

      Whats the exact issue he is having?
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    17. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      01-21-2019 04:15 PM #241
      Current status. Bundled up until I knock out some customer wiring projects and get the rest of the new engine and trans parts in.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    18. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      03-21-2019 12:04 PM #242
      Bought it a house.





      All set to go after I change all the fluids. Track soon once the weather cooperates.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    19. 03-21-2019 07:41 PM #243
      Looks great! How hard are you leaving? (RPM, dumping or slipping the clutch) 1.57 60's must feel like a rocket!

      That hydraulic handbrake is the way to go. I used to run that to just the rear wheels with a pressure switch coming out the back to engage the 2 step.

      Are you running an alternator? (Saw one on the first page) Have you considered a 16v battery with a stepdown box/resistor to run the sensitive electronics?

    20. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      03-21-2019 10:10 PM #244
      Quote Originally Posted by MkIIRoc View Post
      Looks great! How hard are you leaving? (RPM, dumping or slipping the clutch) 1.57 60's must feel like a rocket!

      That hydraulic handbrake is the way to go. I used to run that to just the rear wheels with a pressure switch coming out the back to engage the 2 step.

      Are you running an alternator? (Saw one on the first page) Have you considered a 16v battery with a stepdown box/resistor to run the sensitive electronics?
      Its cut 1.51 and its got some left. 5800ish on the 2step, dumping hard.

      I have the hydro brake to the rear but I don’t really use it. The twin grabs too hard to preload.

      Using a 70a alt and decent size 12v batt. I did consider 16v but w big coils, elect waterpump, fan, big efi pump I thought it would be better. I may do it if I put a mech fuel pump on and ditch the water.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    21. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      04-08-2019 06:51 PM #245
      New crank



      New front main



      New pistons?

      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    22. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      06-05-2019 09:36 PM #246
      Crank pulley came off again on a test hit on Sat. Key is gone and crank is .035” under where it should be. Luckily its less than .001” out of round. Fix for now is a shim in the pulley to take up the slack and the third or fourth crank bolt in this motor.





      Real fix is the forged crank but still waiting on pistons.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    23. 06-06-2019 11:48 AM #247
      dang......... that blows on the crank. i have done that 2x on 1.8t's. ended up putting 2 tool steel pins into the crank/pulley as my own fix so far its holding fine.

    24. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,100
      Cars
      15 Jetta 92 Corrado VR6
      06-06-2019 03:37 PM #248
      Just got a kit for the pins if it happens again
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    Page 10 of 10 FirstFirst ... 678910

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •