Type: Posts; User: Butcher
With the lambda hooked up, then the most likely fuel mixture change is from the electronics. The way that system works is that there is a temperature switch that tells the lambda module that the...
'Lambda not hooked up' means what?
The lambda system is hooked up and working but there is no O2 sensor installed?
The lambda system is not even installed in the car [and it should]?
I doubt if the plunger is sticking. On decel, it's possible that the mixture will be leaner. In my opinion, 12 is way too rich for a steady state cruise mixture, heck, it's too rich for idle too.
Do you really think that plastic handle will loose the lug bolts?
If you put the lug bolt on the tool, it can help you start the bolt with your fingers. There is a metal wrench that does the hard...
Yes, you can pretty much install anything you want as long as it fits into the head and the wire can plug on the top. How long with the wrong plug last? Who knows.
Love to hear what you found
You really should get this resolved or you will have some serious issues.
What seems to be the issue?
Let us know how it turns out.
There is just no money in older VW's. You got to make it to keep the doors open.
That would work.
Sadly, this get annoying. We can read and life is not fair.
ALL electric fuel pumps in ALL cars are worn out by 197k miles. The electric motor brushes wear out and when that happens the pump fails.
Almost all cars with a crank sensor code is NOT a crank...
Usually, cam/exhaust/chip may get you a few horsepower and that will only be on the upper end [where you're rarely driving at]. With larger valves and larger ports [along with the first stage] you...
Sadly, just because the computer gives you a code, does not mean that anything is bad. It's only giving you information for you to make a few tests to confirm the part is good or bad.
You make power by moving more air. It's that simple. The more air, the more power. That is why a turbo/supercharged engine can make a lot more power than a normally aspirated engine.
I'm looking at this picture and is it true that #2 line is not supported in the long stretch between the pump and injector. I see that there are two brackets but none in the middle. This would be...